View LM1-EWN1-11-N2_1264993.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) SMD LED
Model # LM-EWN--N2 Data Sheet
120-degree, 3.2 x 2.7 mm, power SMD in white color with water-transparent lens
Applications
* * * * Indicators Illuminations LCD Back Lights Automobile Applications
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient
Note 2 Note 1
Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS
Absolute Maximum Rating 30 100 5 130 -40 ~ +100 -40 ~ +100 110 350 200
Unit mA mA V mW C C C C/W C/W
Junction/Solder Point
1. 2.
Notes:
Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on PCB FR4 (pad size 16 mm2)
Typical Electrical & Optical Characteristics (TA = 25C )
Characteristics Forward Voltage Reverse Current Symbol VF IR IV x y 21/2 Condition IF = 30 mA VR = 5 V IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA deg Unit V A mcd 900 1400 0.31 0.32 120 Minimum Typical 3.6 Maximum 4.2 10
D-CT164.000 Data Sheet: CL
Luminous Intensity Chromaticity Coordinates 50% Power Angle
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LM-EWN--N2 (IF = 30 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM1-EWN1-11-N2 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA. A1 A2 B1 B2 c X2 or above X1 1800 mcd W2 1400 mcd W1 1120 mcd V2 900 mcd Chromaticity Coordinates
Luminous Intensity (IV)
2240 mcd
Rank Chromaticity x Coordinates y
0.245 0.229 0.264 0.267
A1
0.280 0.248 0.264 0.220 0.264 0.267 0.283 0.305
A2
0.296 0.276 0.280 0.248 0.283 0.305 0.307 0.337
B1
0.313 0.297 0.296 0.276
Rank Chromaticity x Coordinates y
0.307 0.337 0.330 0.360
B2
0.330 0.318 0.313 0.297 0.330 0.360 0.361 0.385
c
0.356 0.351 0.330 0.318
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the color coordinates is 0.01. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging" document. 6. Please refer to the "Cree LED Lamp Reliability Test Parameters" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. 8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT64.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE Chromaticity Diagram
0.90
CIE
520
0.80
530 510 540 550 560
0.70
0.60
490
0.50
570 580 590
Y
0.40
c B2
600 610 620 630
0.30
480
A1
B1 A2
0.20
470
0.10
460
0.00 0.00 0.10 0.20 0.30
X
0.40
0.50
0.60
0.70
0.80
4/5
Format #: COTCO-D-074
REV.4
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT64.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Document No. SPE/LM1-EWN1-11-N2 Rev. No. 01
Graphs
100.0 80.0 60.0 40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 If (mA) Vr(V) -50 -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE.
FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Half Power WL=150nm 2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 100% 75% 50% 25% 0% 400 500 600 700 800
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
50 40 30 20 10 0
IF(mA) Rth j-s=200 C/W
50% Power Angle :
0
Ie(%)
100% 80% 60%
Rth j-a=350 C/W T ( C) 0 20 40 60 80 100
-90 -60 -30 0 30 60 90
40% 20% 0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C
FIG.6 FAR FIELD PATTERN.
Items Prepared by Checked by Approved by FCN#
Signatures
WangFJ XieJH DavidLiu
Date
2007-04-10 2007-04-10 2007-04-10 Rev.No Date
Revision History
Change Description
FCN20070101
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in Please refer to COTCO Website for the latest version. Data is subject to change without prior notice; this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Copyright@2002 Cotco International Ltd. CLD-CT64.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Document No. SPE/LM1-EWN1-11-N2 Rev. No. 01 Dimension Drawing
Mechanical Dimensions
All dimensions are in mm.
ions s at Ta = 25C bol Absolute maximum Rating 30 100 5 130
pr tg
Unit mA mA V mW C C C C/W C/W
2
-40 ~ + 100 -40 ~ + 100 +110
j
JA JS
350 200
<=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
l Characteristics ( Ta = 25C) ) ymbol VF IR IV x y 21/2 Condition IF = 30mA VR = 5V Min. ----900 --Typ. 3.6 --1400 0.31 Max. 4.2 10 ----Unit V A mcd ---
Notes = 30mA IF
RoHS Compliance I = 30mA
F
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise 30mA IF = restricted materials in this product are below the maximum concentration values (also referred to as the --0.32 ----threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment IF as amended through April 21, 2006. --120 --deg (RoHS), = 30mA Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT64.000 2/5
Format #: COTCO-D-074
REV.4
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tape pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LM1-EWN1-11-N2-00001 LM1-EWN1-11-N2-00002 Description SMD 120 White, FULL RANK, Tape & Reel SMD 120 White, A1, A2, B1, B2, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT64.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LM1-EWN1-11-N2

	To Download LM1-EWN1-11-N2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .